INSTALLATION MANUAL
Page 12 of 15
HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and
accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by
HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the
general handling of these products please contact HUBER+SUHNER.
Step 24
All HUBER+SUHNER fiber optic assemblies are
100% manufactured in an industrial environment
and are governed by standards which are
implemented and controlled within the factory
environment.
The fiber optic cable assemblies as well as the fiber optic
systems are inspected for insertion loss and the cleanliness of
the ferrule end face. Factory-terminated fiber optic connectors
supplied to the market are cleaned and ready for installation.
Despite our careful control, contamination of dust or
microscopically small parts on the end faces cannot be 100%
excluded.
If cleaning is necessary see cleaning instruction on
www.hubersuhner.com/en/support
