Document: DOC-0000736636 / Date of publication: 04.04.2016 / uncontrolled copy
page 1/2
Instruction
Quick-Fit plus preparing tool 74_Z-0-12-18 for
½” annular cables
Safety Instructions
Insertion / Replacement of Blade Unit
Required Tools
1x screwdriver
Verify change position
Make sure that the preparing tool is in the
START/END position. If not, then keep the grip fix
and rotate the base tool clockwise or counter-
clockwise until the START/END position is
reached.
Separate base tool / grip section
Release the lock-mechanism (latch) at the
preparing tool carefully by using a screw-driver
and remove the base tool part at once.
