Page 2
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626//330-3861
7. Install lamp of type and wattage
shown on fixture label.
LIGHTVAULT
®
- LTV Lens Reflector
LTV55 / 56 & LTV755 / 756
Installation Instructions
8. Loosen tilt adjustment screws, aim
reflector to desired orientation and
lock position by tightening tilt
adjustment screws.
9. NOTE: After installing lamp let
fixture warm up for 5 minutes
before completely closing.
Install eyeball-lens frame, lens and
gasket making sure surface is
clean and dry.
6. Remove eyeball frame, lens and
gasket.
NOTE: Make sure gasket and
gasket surface is clean and dry.
Make certain no dirt has fallen
into screw holes. Any foreign
objects trapped in the gasket
areas will create potential points
of entry for ground water.
5. Install eyeball onto housing (mak-
ing sure eyeball will be facing de-
sired position), and tighten oppos-
ing screws progressively and
evenly until tight.
Note: Eyeball
will mount in 8 directions @ 45°
increments.
4. Grease threads before installing
eyeball onto housing.
10. Coat screws with silicone grease and tighten
opposing screws progressively and evenly until tight.
Any foreign object trapped in gasket areas will create potential
points of entry for
ground water.Tighten opposing screws progressively and evenly until
tight.
1
2
3
4
5
6
1
2
3
4
