background image

26 

Warranty

The Geyser-RO, supplied by 

Hubbell Electric Heater Company

 and delivered new in the original 

packaging is warranted by 

Hubbell

 as follows: 

One (1) year warranty on workmanship and materials. 

Six (6) year limited warranty on the sealed refrigeration system only. 

This limited warranty begins on the original date of purchase or 180 days from the date the unit was 
manufactured, whichever comes first. This warranty is only valid on Geyser-RO units purchased and 
installed in the United States and Canada. To receive this warranty 

Hubbell

 must be contacted for 

determination of problems and service procedures. Original bill of sale must be presented as proof of 
purchase upon request. Within the warranty period, replacement parts will be shipped to the service 
company for replacement. Upon replacement the service company is responsible to return the 
defective part to 

Hubbell

 at, 

45 Seymour Street, Stratford, CT 06615

Optionally, the entire Geyser-RO may be returned, in the original box with protective packaging at the 
customer’s expense for 

Hubbell

 to repair. Repair work will be done at 

Hubbell

 at no charge providing 

the repair was determined to be required because of defective workmanship or materials. The 
replacement part(s) assume the unused portion of the warranty. The warranty does not include labor, 
or costs incurred for diagnosis, labor for repair, removal, or installing of replacement parts. Shipping 
cost of replacement parts to and from 

Hubbell

 is not included. 

The limited warranty covers manufacturing defects in materials and workmanship encountered in 
normal use of this product as it is intended as a water heater, and shall not apply to the following, 
including but not limited to: consumable items such as filters, damage that occurs in shipping, delivery, 
or installation. Also applications and uses for which the Geyser-RO is not intended, altered units or 
parts, cosmetic damage, damage from abuse, neglect, fire, water, acts of nature, external plumbing, or 
leaks, external wiring, utilities, parts, services, accessories, and failure to follow installation and 
operation instructions. 

Hubbell

  makes  no  warranty  as  to  the  fitness  of  the  equipment  for  a  particular  use  and  shall  not  be 

liable  for  any  direct,  indirect,  or  consequential  damages  in  conjunction  with  this  contract/and  or  the 
use of the equipment.  

Buyer agrees to indemnify and save harmless 

Hubbell

 

Electric Heater Company 

from any claim or 

demands against 

Hubbell Electric Heater Company

 for injuries or damages to third parties resulting 

from buyer’s installation, use or ownership of the equipment. 

Summary of Contents for Geyser-RO




























Reviews: