Part No...........................................
701 Millennium Blvd • Greenville, SC 29607
With representatives offices in principal cities throughout North America.
Copyright , revision, All Rights Reserved - Printed in U.S.A.
2018 06/25/18
w
w
w
.p
re
s
c
o
lit
e
.c
o
m
•
P
re
s
c
o
lit
e
T
o
ll
F
re
e
T
e
c
h
n
ic
a
l S
u
p
p
o
rt
1
.8
8
8
.P
R
S
.4
T
E
C
•
H
o
u
rs
: 8
a
m
-
5
p
m
E
T
93047835
Page 7 of 14
In
s
tr
u
c
tio
n
S
h
e
e
t
11. Once the tether is attached, push the tether cable up into the ceiling, away from the LEDs, while
slowly raising the reflector into the ceiling opening. It will make it easier to install the reflector if the
keyhole slots in the reflector top flange are generally lined up in the same location as the reflector
mounting buttons on the light engine, visible from below the ceiling on the yoke bracket on either
side of the LED circuit board (See FIG. 8 & FIG. 9).
WallWash Reflector Special Instructions: The WallWash reflector has four (4) keyhole
slots (See FIG. 10). Align the unit so that the kicker is opposite the wall (See FIG. 11).
FIG. 9
FIG. 10 FIG. 11
12. Push the reflector into the fixture until it contacts the light engine yoke and rotate it slightly from side
to side until the reflector mounting buttons fit into the open holes in the keyhole slots on the reflector.
Once these buttons are in the keyhole slots, push up on the reflector to seat it against the light
engine, and rotate the reflector clockwise until the buttons lock into the spring detents at the ends of
the keyhole slots. A slight click will be heard/felt when the reflector is properly locked to each
reflector mounting button on the light engine. If the reflector flange is not flush with the ceiling after
installation, or if the keyhole slots are difficult to line up, the light engine yoke may need to be
checked for proper attachment location, or the reflector upper flange may need to be straightened if
it was accidentally bent. There is enough flexibility in the light engine yoke mounting slots so the
location can be finely adjusted up or down if the need arises.
KEEP THESE INSTALLATION INSTRUCTIONS!
REFLECTOR
MOUNTING
BUTTON
REFLECTOR
MOUNTING
BUTTON
LIGHT ENGINE YOKE
ADJUSTMENT SCREW
(ONE OF TWO)
LIGHT
ENGINE
YOKE
LEDs
WallWash Reflector
REFLECTOR
KEYHOLE SLOTS
REFLECTOR
KEYHOLE
SLOTS
WALLWASH
KICKER
WALL
