7
3.Cable segment withstand voltage test
:
In the function selection interface, select Cable Test, press Start and Stop, and the Cable
Test setting page is displayed.
Select "Setup" to display detailed parameter settings.
At this time, press the function key to move the cursor to the corresponding parameter and
modify the value through the increase or decrease key or the start and stop keys. Set the
voltage and withstand voltage time, after modifying the parameters, click the "Start and
Stop " to exit to the parameter setting interface, move the cursor to the "start" test, and
press the “start and stop” button to enter the test.
Cable
1 sec
Setup
Speed
3.0
Start
Return
Cable Test Parameter
S
S
S
S
S
S
Summary of Contents for HZZGF-Z Series
Page 14: ...11 2 Transformer 3 MOA...