5
At this point, you according to the prompts on the screen in turn five basis points
(that is, the four corners and center) for calibration, the calibration after a point, cross
cursor automatically moved to the next calibration point.
Note: equipment factory has been calibrated, no special circumstances, do
not easily into the calibration! Remember that!
If the boot without touching the cross cursor after 2 seconds, automatically enter
the boot welcome screen, as shown in the figure below:
There are three functions in the current display items to choose from:
"Set.", enter the clock and the experimental parameters Settings screen
"Data:" into the historical test data
"Test" : enter the sample picture