11
displayed on the screen:
PRT
and
SAVE
may not appear and cursor is at
ESC
when the test menu is just
displayed
STR , PRT , SAVE
and
CUR
may be chosen in sequence by pressing Key-S, as well
as 7-character number plate and the sign of SET or not, e.g.
√SFLO1234
,
IDLE
,
ESC
.
、
may be chosen in sequence. by pressing key –s.
Method for SET and reset of number plate:
When cursor is at the 8-character number plate and a former sign such as
√AFL01234
（
number plate set originally
）
, press Key-E and cursor is at only sign ×, while
“×” or “√” can be chosen by pressing Key-▲ or Key-▼. Sign “×” indicates not SET number
plate, while sign “√” indicates SET number plate. When “×” is chosen, number plate shall
not be set and the 7-character number plate behind it shall be invalid, and there shall be
not number plate in PRTing out, nor is in data saved. At the moment, press Key-E again,
cursor will return to including the whole 8-character
×AFL01234
（
indicating not SET
number plate!
）
.
Press key-s to move crusor to the first charatcter A ,and press key -
△
or key -
▽
to reset.
When sign “√” is chosen, SET and revision of number plate shall be performed next.
Press Key-S again to move cursor to the second character F, and press Key-▲ or Key-▼
for reset. After the reset of second character is completed, press Key-S again to move
IDLE
hh
：
mm
：
ss
HC
0000
CO
0.00
CO
2
0.35
O
2
0.00
NO
X
0
RPM 0
λ
1.000
Flow
2105sccm
COcor
0.00%
O.T 114.1
℃
P 101.6kpa
t 27.6
℃
TEST
STR
PRT
SAVE
CUR
