2
I.Unpacking and installation tester
1.Check the received instrument
When you receive Allwin’s equipment, check the tester follow the below steps
：
（
1
）
The instrument box is intact; if damaged, we recommend that you do not unpack the
box, but contact with the company's distributors or Allwin Instrument Company.
（
2
）
If the instrument package is good, then please check what you have ordered
instrument model are the same with the model label on the box; if not, please contact
Allwin dealer or Allwin company
After checking through 1.1.1 and 1.1.2, if there is no problem, you can unpack the carton
and check the instrument your ordered
2.
Check test clips of the tester in the carton.
Please check your accessories within the box to see if the test clips are completed;
Power cord, CS26016-6 high voltage test clip(red), CS26009-3 test clip(black).
3.Carton and packing materials
Please save the original packing materials for use in future transportation.
4.safety rules for using the instruments
In the use of equipment, be sure to follow the following safety rules:
（
1
）
Do not use the tester in flammable gases environment
In order to prevent the occurrence of an explosion or burning, do not use the tester in
alcohol, thinner or other flammable material next to the tester. Also do not use the tester
where contain flammable gases in the environment.
（
2
）
Do not use the tester in heat or direct sunlight places
Components that are inside the instrument are precision devices used. User should avoid
operating it where in the direct sunlight or where has high temperature. This will
accelerate the aging of the instrument or Shorten the life of the tester but also result in
damaging to the tester.
Instrument usage temperature range: 0 º C ~ +40 º C;
