12
7.Data Deletion
Under data reference mode, press PEAK + POWER button to delete all the data in storage, and
return to normal testing mode. During the deletion of data, it will display “dEL” symbol.
8.Data Transmission
B Type: has the function of wireless data transmission. When the Meter under testing mode, the
test result will be transferred to receiver by wireless transmission and the receiver will display test
result real time, being clear at a glance.
Only under testing mode, the meter will transmit, If the receiver has not received emission
signals, it will display “no - -” symbol dynamically.
B Type: Transferred
HZCR9000B Type: Wireless transmission test data, a straight-line distance of about 30 meters,
can penetrate the floor to receive data.
B .Operation of Receiver
(Note: For HZCR9000B only)
1.Power On/Off
Press POWER button to power on, the instrument will displays the LCD screen, entering normal
testing mode. If LCD display is relatively dark after power on, it is possible that battery voltage is a bit
lower. Please replace battery. 15 minutes after powering on the meter, if it remains idle, an
auto-power off procedure starts to preserve the battery life and LCD will continue flash until the
complete switch off takes place after 30 seconds. In case of LCD continuous flash, press POWER
button, then the meter will continue to work.
Under HOLD mode, press POWER to power off.
Under data reference, first, press POWER button( for 3 seconds ) to exit data reference mode,
then come back to data receive mode, press POWER button once again to power off. During exit
from data reference, it will display the symbol of “End”.
2.Data Reception
After normal power on, the receiver will under receiving mode. If there are emission data, the
receiver will display the test result real time. If it has not received any signal, the receiver will search
signals constantly, and display “no- -”symbol dynamically.
3.Data Maintenance
Under Data Reception mod, press HOLD button, keep LCD display, “HOLD” symbol indication.
