12
4.4 Data Echo
The system is able to echo saved data. By selecting name of power station, name of transformer,
test category and time, as well as winding type and time in turn in area F, the completed test result is
called out. By default, the data is displayed at the position of the first curve and displayed downwards
with progressive increase of the selection result. When the number of curves comes to the maximum (9
curves), the curve no longer increases and you may select the curve to be replaced for progressive
replacement in this case. When a curve is decided not requiring analysis, you may right click “clear
curve” on the curve description information (E) so that the curve will be removed out of the analysis list
automatically.
Curves in area E are automatically divided into three groups, 1-3 as a group, 4-6 as a group and 7-9
as a group and correlation analysis of each group of curves is performed inside the respective group.
Therefore, it is required to ensure the curves to be analyzed are within the same group, or otherwise you
cannot get correct analysis result.
When “analysis”
is clicked after selection of curve, the report display window will pop up at the
left side. All other operations are the same as operations described in 4.3.
4.5 Report Saving Position
Report is saved under folder of disk D with the folder hierarchy of:
