17
7.3.5 Test Record Query
Fig. 14 Test record query
Fig. 15 Real-time clock setting
The test record query screen is shown in figure 14. All the test records,the test data, waveforms
and corresponding parameter settings stored in the instrument can be viewed in the screen.The saved
test records in the instrument can be transferred to the U diskor printed. The number before "001/003"
represents the saved number of the test record currently viewed, and the number after indicates the
number of saved test records, and the instrument can hold up to 100 test records. Press“←→”key to
switch the test record to view.
7.3.6 Real-time clock setting
The real-time clock setting screen is shown in figure 15. It is used to set the clock that comes with
the instrument. Press "↑ ↓" to adjust the value, press "← →" to move the cursor, press "ENTER" to
save the setting, and press "CANCEL" to give up the setting.
7.4 Voltage Collector Operation Instructions
Turn on the voltage collector power switch, the voltage collector is initialized into the boot screen
(seen in Figure 16), which displays the voltage collector software version number, hardware version
number and instrument number; then the screen will automatically enter the "test data" screen.
Fig.16 boot screen
Fig. 17 test the data screen
7.4.1 Test Data Display Screen
The test data display screen is shown in figure 17. This screen shows:
