3.4 Measure mA current with loop Power
Caution
To avoid damage to the device during test, please ensure the calibrator in proper
model before connecting the test wire.
Under this model, the calibrator can 24V loop power to the
transducer,and read the loop current value at the same time.
Measure DC mA current with loop Power scale
1. Press to step to Loop Power model.
The display shows MEASURE with unit mA (measure mA) and Loop
Power.
2. Contact the load circuit or source with the probe of the test wire.
3. If the current over 24mA, it will show “-OL-”.
30V DC voltage in maximum
Press until
the
display
shows
MEASURE
(measure mA)
Loop
Power
(use
loop
power)
Two-wire transducer