Press any key or rotate the turncap to exit this function.
3.3 Measure DC current (mA)
Caution
To avoid damage to the device during test, please ensure the calibrator in
proper model before connecting the test wire.
To test mA DC:
1. Prees to step to MEASURE model.
The display shows MEASURE mA.
2. Contact the load circuit or source with the probe of the test wire.
3. If the current over 24mA, it will show “-OL-”.
Press
until
the
display
shows
MEASURE
(measure
mA)
24mA DC current in maximum