Huawei ZTE MU500 User Manual Download | Manualshive

Page: 16 / 25

background image

Page 16 of 25

SETTINGS > DEVICE SETTINGS > RESET



Press Reset to reset your device to factory defaults.

SETTINGS > DEVICE SETTINGS > RESTART



Press Restart to restart your device.

SETTINGS > DEVICE SETTINGS > POWER SAVE



If there is no Wi-Fi traffic detected then the device will switch off Wi-Fi as determined by the Wi-Fi
sleep setting.



Set Wi-Fi sleep time to Never Sleep to keep the Wi-Fi always on.



Press the Help icon

to get in context tips

SETTINGS > DEVICE SETTINGS > SOFTWARE UPDATE



With Check for New Version enabled you are notified in the web user interface if there is an update
available.



You need to be in the Connected state to download new versions.



Press the Update Now button to see if there are software updates for your device.



Updates are disabled by default when roaming to minimize unwanted data charges. Check the
Roaming box to enable updates when roaming.



Press the Help icon

to get in context tips

«
...
14
15
16
17
18
...
»

Summary of Contents for ZTE MU500


























Reviews:

No comments

Related manuals for ZTE MU500

DWL-7130AP - xStack - Wireless Access Point

Brand: D-Link Pages: 4

Sport Pace Wireless

Brand: Jabra Pages: 2

3CRWEASYG73 - 11g Wireless LAN Outdoor

Brand: 3Com Pages: 4

iPAQ Connection Point CP-1

Brand: Compaq Pages: 50

Nfiniti Airstation WHR-G300N

Brand: Buffalo Tech Pages: 48

Wi-Fi Bubble SpitFire

Brand: NAUTITECH Pages: 22

Barricade SMCWBR14T-G

Brand: SMC Networks Pages: 132

Brand: Dillinger Labs Pages: 16

Brand: Arista Pages: 4

Brand: ausdom Pages: 59

Brand: AvaLAN Pages: 13

Brand: SoundPeats Pages: 53

Brand: EnGenius Pages: 2

Brand: Saramonic Pages: 21

Brand: P2 Mobile Technologies Pages: 15

Brand: Luxul Pages: 12

Brand: ViewSonic Pages: 9

Brand: ViewSonic Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands