User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Chapter 3 Configuring
3-33
To configure the WAN connection for DHCP, perform the steps
listed below. Some of the settings do not need to be changed the first
time the device is set up, but can be changed later if you choose.
1. Click
the
Connection 1
button under
WAN Setup
to view the
default
PPPoA Connection Setup
configuration menu.
2. Select
DHCP
from the
Type:
pull-down menu. This action will
change the menu so it offers different settings for
configuration.
3. Type in a
Name:
in the space provided (
WAN_PPPoA
is used
in the above example).
4. If you are told to change the
VPI
or
VCI
values, type in the
values given to you by your service provider. Many users will
be able to use the default settings.
5. Leave the default
QoS
values if you are unsure or the ISP did
not provide this information.
6. Do not change the
PCR
or
SCR
values unless you are
required to do so. If you are told to change these, type in the
values given to you by your service provider.
7. The
Encapsulation
values LLC (SNAP) and VC (MUX) are
two different methods of encapsulating the PPP packet.
Contact your ISP to make sure which encapsulation is being
supported.
8. Click the
Apply
button when you have entered all the
information. The web browser will briefly go blank. You are
now finished changing setting for the primary WAN
connection known as Connection 1. It is now necessary to
