User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Chapter 3 Configuring
3-23
3. Under
Options
, enable
NAT
and/or
Firewall
by selecting the
corresponding selection box.
4. If you are told to change the
VPI
or
VCI
values, type in the
values given to you by your service provider. Many users will
be able to use the default settings.
5. Leave the default
QoS
values if you are unsure or the ISP did
not provide this information.
6. Do not change the
PCR
or
SCR
values unless you are
required to do so. If you are told to change these, type in the
values given to you by your service provider.
7. Type
the
Username
and
Password
used to verify the identity
of your account. Typically, the Username is an account
number assigned by your ISP and appears in the form
account#@serviceprovider.com
, while the Password may
have been chosen by the account holder. For most users, the
remaining settings will not need to be changed. See your ISP
for further information.
8. Click the
Apply
button when you have entered all the
information. The web browser will briefly go blank. You are
now finished changing setting for the primary WAN
connection known as Connection 1. It is now necessary to
save the changes you just made and restart the
WA1003A-RU.
9. To save the changes made to Connection 1, click the
Tools
tab and then click on the
System Commands
button. Click on
the
Save All
button to store the configuration settings. Click
on
Back
button to return to the System Commands menu.
