Huawei VPC600, Manual, Page: 6 / 14

6
Ceiling-Mounted Purchase a bracket for ceiling-mounted installation and mount the
VPC620 or VPC600 onto the ceiling using the bracket. The bracket
must meet the following requirements:
It is able to bear a weight of at least 8.5 kg (18.74 lb) and has a
thickness between 2 mm (0.08 in.) to 3 mm (0.12 in.).
It comes with a location pillar, which can be inserted into the
location hole of the VPC620 or VPC600. The distance between the
screw hole on the bracket and location pillar must be 14.5 mm (0.57
in.), which is also the distance between the two holes on the bottom of
the VPC620 or VPC600.
It comes with a screw hole and one or more 1/4"-20UNC screws.
When attaching the purchased bracket and VPC620 or VPC600, it is
recommended that you use a 1/4"-20UNC screw delivered with the purchased bracket
rather than a 1/4"-20UNC screw delivered with the VPC620 or VPC600 because the
length of the latter may be too long or too short to hold up the purchased bracket.
Others Install the camera on a tripod (separately purchased).
Powering the Camera On
Connect the cables and power adapter to the camera and press the power button. After a few
moments, video appears on the display. The camera faces forward the first time you power it on.
Each time the camera is powered on, it restores to the position where it stays before being
powered off.
If the HD-VI port of the camera is connected to a TE series videoconferencing endpoint, you do not need to
connect the power adapter to the camera or press the power button. When the videoconferencing endpoint is
powered on, it supplies power to the camera to automatically power the camera on.