Component
Description
Optical port
l
This port supports the access of an optical fiber, and it
functions like a GE port.
l
Do not connect cables to both the GE and optical ports. If
that happens, the optical port takes precedence.
RS-232 serial port
This port is used to execute serial port commands and internal
debugging.
RST button
This button is used to reset the board.
CAUTION
For service provision, connect the GE0 or GE1 network port to a gigabit switch.
l
Board indicators
describes the indicators in the board front panel. The real time status of the
board can be ascertained by viewing these indicators.
Table 3-6
Indicators in the board front panel
Indicato
r
Status
Description
ACT
Steady green
The board is the active board.
ALM
Off
The board is operating correctly.
Steady on
The board is malfunctioning.
RUN
Steady green
The board is powered on but is malfunctioning.
Off
The board is not powered on or the board fails
to start.
Slow blinking (about 0.5
Hz, once every 2 seconds)
The board is operating correctly according to
the configuration.
Quick blinking (about 4 Hz,
four times per second)
The board is loading programs.
GE/FE
Steady green
The network port connection is normal.
Green off
No connection is established on the network
port or the connection is faulty.
Blinking orange
Data is being received or sent through the
network port.
Orange off
No data is being received or sent through the
network port.
HUAWEI VP9650
Product Description
3 Product Structure
Issue 06 (2018-08-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
