Figure 20-1
Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 20-1
Maintenance > Remote MGMT
Label
Description
Services
This is the service you may use to access the LTE Device.
LAN/WLAN
Select the
Enable
check box for the corresponding services that you
want to allow access to the LTE Device from the LAN and WLAN.
WAN
Select the
Enable
check box for the corresponding services that you
want to allow access to the LTE Device from the WAN.
Port
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
20.3 The TR069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your LTE Device, can
be managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on
sending Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent
in Extensible Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the LTE Device, modify settings,
perform firmware upgrades as well as monitor and diagnose the LTE Device. You have enable
the device to be managed by the ACS and specify the ACS IP address or domain name and
username and password.
Please refer to the TR-069 model tree for TR-069 settings and notice items.
Click
Maintenance > Remote MGMT > TR069
to open the following screen. Use this
screen to configure your LTE Device to be managed by an ACS.
LTE CPE B2368
User Guide
20 Remote MGMT
Issue 03 (2019-01-31)
Copyright © Huawei Technologies Co., Ltd.
148
