Name
Display
Description
Restore factory
settings
DIS: Disable the
function of restoring
factory settings
(default).
ENA: Enable the
function of restoring
factory settings. The
setting takes effect
after you exit the
setting screen. After
factory settings are
restored, the output
voltage, calibration
parameters, and log
information are not
restored.
LCD password
control
ENA: Enable LCD
password control
(default). After the
function is enabled, a
password is required for
accessing the settings
screen.
DIS: Disable LCD
password control. After
LCD password control is
disabled, no password is
required for accessing
the setting screen.
However, other users
may have the
permission to access
the parameter setting
screen to modify
parameters.
Password setting
● Initial password:
000001
● You are advised to
change the initial
password after
installation.
● On the password
login screen, press
and hold ON/MUTE,
SELECT, and OFF/
ENTER at the same
time for 3s to restore
the initial password.
UPS2000-G-3KRTLL
User Manual
4 Control Panel
Issue 01 (2020-10-26)
Copyright © Huawei Technologies Co., Ltd.
51
