U9200 Maintenance Manual
INTERNAL
(2012-06-13)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Page 23 of 80
Figure 7-6
Removing the four screws
(2)
Lift the volume key FPC and power key FPC to the extent that they are separated
from the magnesium alloy.
When you reinstall the FPCs, check whether the adhesive backed is damaged; if it is, change the
adhesive, and remove the residues from the magnesium alloy.
Figure 7-7
Lifting the volume key FPC and power key FPC
(3)
Remove the shielding cover.
Stick tweezers into the spacing, as shown in the following figure, to pry upwards.
Take care not to damage the connector under the shielding cover or deform the
shielding cover. Remove the shielding cover from the two buckles.
(4)
Disconnect the BTB connector from the Flash_FPC using tweezers, and remove the
FPC.
NOTE
Hexagon screws
Plus screws
