Huawei U9200 Maintenance Manual Download Page 16

Page: 16 / 80

U9200 Maintenance Manual

INTERNAL

(2012-06-13)

Huawei Proprietary and Confidential

Page 16 of 80

5 Software Upgrade

5.1 Upgrade Preparation

Table 5-1 lists the items to be prepared before a software upgrade.

Table 5-1

Items to be prepared before a software upgrade

Category

Item

Description

Upgrade
environment

Computer

Operating system: Windows 2000, Windows
XP or Windows 7

microSD card

With at least 512 MB free space

Battery

With at least 20% power remaining

Upgrade file

update.app

This version is provided for reference only.
Please download the latest version when
upgrading the software.

microSD card upgrade

Normal upgrade

Forcible upgrade

5.2 microSD Card Upgrade

5.2.1 Normal Upgrade

Create a folder named

dload

in the root directory of the microSD card.

Copy the upgrade file

update.app

to the

dload

folder.

Install the microSD card on the phone and power the phone on.

Enter *#*#

2846579

#*#* in dialing mode. Choose

ProjectMenu > Upgrade > SD card

upgrade

, and click

Confirm

The upgrade progress is displayed on the LCD.

After the upgrade is completed, the phone automatically restarts.

If the upgrade fails, the phone stays on the upgrade page, and an upgrade failure message is
displayed.

5.2.2 Forcible Upgrade

If the phone fails to be powered on, perform the following operations to start a forcible
upgrade:

Create a folder named

dload

in the root directory of the microSD card.

Copy the upgrade file

update.app

to the

dload

folder.

Install the microSD card on the phone.

Summary of Contents for U9200
















































































Search results

Summary of Contents for U9200

Reviews:

Brands by name

Popular brands

Huawei U9200, Maintenance Manual

Search results

Summary of Contents for U9200

Reviews:

Brands by name

Popular brands