Figure 9-19
Installing the optical module
Step 2
Install the optical fibers, as shown in
and
.
1.
Remove the dust-proof caps from the connectors at the end labeled
2A
and
2B
on the optical
fibers, and insert the connectors into the optical modules in the BBU.
2.
Route the optical fibers out from the cable outlet on the bottom right side of the cabinet.
3.
Connect the other end of the optical fibers to a transmission device.
NOTICE
The TX and RX ports on the BBU boards must be connected to the RX and TX ports on the
transmission equipment, respectively.
Figure 9-20
Removing the dust-proof cap from the optical fiber
TP48200A
Installation Guide
9 Installing Cables
Issue Draft B (2014-01-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50
