TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
6 Installing Components
Issue 03 (2014-12-02)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40
Step 4
Connect the ground cable for the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 5
Unscrew and remove the SMU06C.
Step 6
Connect one end of the signal cable for the smoke sensor to the smoke sensor and the other
end to the SMOKE port on the SMU06C, as shown in
Figure 6-3
Installing a signal cable for the smoke sensor
The SMOKE silkscreen is on the plastic cover in the SMU06C.
Step 7
Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
6.3 (Optional) Installing a Water Sensor
Prerequisites
You have obtained an ESD wrist strap and a pair of ESD gloves.
Procedure
Step 1
Secure the water sensor, as shown in
