Huawei SMU11B User Manual Download Page 3

Page: 3 / 58

About This Document

Overview

This document describes the module, panel, and ports, web user interface

(WebUI), application guide, and features.

This document describes all the functions of the SMU, including the product

introduction and system maintenance.

The figures provided in this document are for reference only.

Intended Audience

This document is intended for:

●

Sales engineers

●

Technical support engineers

●

Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not

avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal

injury.

SMU11B Site Monitoring Unit

User Manual

About This Document

Issue 03 (2022-06-06)

Summary of Contents for SMU11B



























































Search results

Summary of Contents for SMU11B

Reviews:

Related manuals for SMU11B

Brands by name

Popular brands

Huawei SMU11B, User Manual

Search results

Summary of Contents for SMU11B

Reviews:

Related manuals for SMU11B

Brands by name

Popular brands