SmartLi-80Ah
User Manual
3 Installation
Issue 02 (2020-05-17)
Copyright © Huawei Technologies Co., Ltd.
34
Step 9
Interconnect the dry contact cable of the fire cylinder and the cable reserved on the side of the
cabinet.
Figure 3-6
Interconnecting cable terminals
Step 10
Check the end pressure gauge on the front of the cabinet. The pointer should be in the green
zone and the pressure reading should be greater than 1.6 MPa at 20°C. Record the reading of
the pressure gauge. 8 hours later, observe the pressure gauge again. The pressure reading
should remain unchanged.
----End
3.3 Installing Cabinets
Securing Installation
Step 1
Determine the cabinet installation position. Draw mounting holes in the installation position
according to the drawings.