Huawei SmartACBox-12/1-JP User Manual Download Page 73

Page: 73 / 79

SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual

7 Maintenance

Issue 03 (2018-05-15)

7.2.4 Replacing the RS485 Signal SPD

Prerequisites



The RS485 signal SPD is faulty.



A spare SPD of the same model is available and functional.

Procedure

Step 1

Disconnect cables from the faulty RS485 signal SPD and label the cables.

Step 2

Remove the faulty RS485 signal SPD.

Figure 7-7

Removing a faulty RS485 signal SPD

Step 3

Install the new RS485 signal SPD.

Step 4

Connect the cables to the RS485 signal SPD based on the cable labels.

----End

7.2.5 Replacing the Power SPD

Prerequisites



The power SPD is faulty.



A spare power SPD of the same model is available and functional.

If an SPD is damaged or its indication window is displayed in red, replace the SPD because it has failed.

Context

A power SPD consists of a surge protection module and a base.

Procedure

Step 1

Remove the faulty surge protection module from the power SPD.

Summary of Contents for SmartACBox-12/1-JP
















































































Search results

Summary of Contents for SmartACBox-12/1-JP

Reviews:

Related manuals for SmartACBox-12/1-JP

Brands by name

Popular brands

Huawei SmartACBox-12/1-JP, User Manual

Search results

Summary of Contents for SmartACBox-12/1-JP

Reviews:

Related manuals for SmartACBox-12/1-JP

Brands by name

Popular brands