5
View the memory information. The memory usage of each present card should be lower than 60%.
System Memory Usage Information:
System memory usage at 2004-08-03 16:10:35
-------------------------------------------------------------------------------
Slot Total Memory(MB) Used Memory(MB) Used Percentage Upper Limit
-------------------------------------------------------------------------------
7 170 58 34% 85%
10 170 60 35% 85%
13 1827 163 8% 95%
14 1827 162 8% 95%
-------------------------------------------------------------------------------
If the memory usage is too high, observe the memory usage for 5-10 minutes. If the memory usage is
still high, contact your agent or Huawei enterprise technical support hotline.
6
6
View the CPU usage information. The CPU usage of each present card should be lower than 80%.
System CPU Usage Information:
System cpu usage at 2004-08-03 16:10:35
-------------------------------------------------------------------------------
Slot CPU Usage Upper Limit
-------------------------------------------------------------------------------
7 13% 80%
10 14% 80%
13 12% 80%
14 8% 80%
-------------------------------------------------------------------------------
If the CPU usage is too high, observe the CPU usage for 5-10 minutes. If the CPU usage is still high,
contact your agent or Huawei enterprise technical support hotline.
7
View the storage media usage information. The storage media usage should be lower than 80%.
Disk Usage Information:
System disk usage at 2004-08-03 16:10:35
-------------------------------------------------------------------------------
Slot Device Total Memory(MB) Used Memory(MB) Used Percentage
-------------------------------------------------------------------------------
13 flash: 103 88 85%
cfcard: 509 438 86%
-------------------------------------------------------------------------------
If the storage media usage exceeds 80%, delete redundant files. For details, see the
Configuration
Guide-Basic Configuration
.
-------------------------------------------------------------------------------
FanId FanNum Present Register Speed Mode
-------------------------------------------------------------------------------
FAN1 [1-2] YES YES 30%(2160) AUTO
1 2100
2 2220
FAN2 [1-2] YES YES 35%(2340) AUTO
1 2250
2 2430
If the fan status is abnormal, check whether the fan module is properly connected, whether the fan
blades are blocked, and whether dust is accumulated on the fans. If the preceding situations occur,
reinstall the fan modules or clean the fan blades. If other situations occur, replace the fan module.
If the fault cannot be rectified, record the fault information and contact your agent or Huawei
enterprise technical support hotline.
