[AC]
wlan
[AC-wlan-view]
ap auth-mode mac-auth
[AC-wlan-view]
ap-id 0 ap-mac 60de-4476-e360
[AC-wlan-ap-0]
ap-name area_1
Warning: This operation may cause AP reset. Continue? [Y/N]:
y
[AC-wlan-ap-0]
ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it
will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:
y
[AC-wlan-ap-0]
quit
[AC-wlan-view]
ap-id 1 ap-mac 60de-4474-9640
[AC-wlan-ap-1]
ap-name area_2
Warning: This operation may cause AP reset. Continue? [Y/N]:
y
[AC-wlan-ap-1]
ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it
will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:
y
[AC-wlan-ap-1]
quit
65
After the APs are powered on, run the
display ap all
command to check the AP states.
If the value of the
State
field displays
nor
, the APs have gone online successfully.
[AC-wlan-view]
display ap all
Total AP information:
nor : normal [2]
Extra information:
P : insufficient power supply
------------------------------------------------------------------------------------
ID MAC Name Group IP Type State STA Uptime ExtraInfo
------------------------------------------------------------------------------------
0 60de-4476-e360 area_1 ap-group1 10.23.100.254 AP5030DN nor 0 5M:2S -
1 60de-4474-9640 area_2 ap-group1 10.23.100.253 AP5030DN nor 0 5M:4S -
------------------------------------------------------------------------------------
Total: 2
5