manualshive.com logo in svg

Huawei S Series, Quick Configuration, Page: 66 / 74

Share
Download
Huawei S Series Quick Configuration Download Page 66

Configuring a VLAN Pool for Service VLANs

Create a VLAN pool, add VLAN 101 and VLAN 102 to the pool, and set the VLAN
assignment algorithm to hash in the VLAN pool.

[AC] 

vlan pool sta-pool

[AC-vlan-pool-sta-pool] 

vlan 101 102

[AC-vlan-pool-sta-pool] 

assignment hash

[AC-vlan-pool-sta-pool] 

quit

63

1

In this example, the VLAN assignment algorithm is set to hash (default 
value). If the default setting is retained, you do not need to run the 

assignment hash 

command.

Only VLAN 101 and VLAN 102 are added to the VLAN pool in this 
example. You can add multiple VLANs to the VLAN pool using the 
same method. You also need to create corresponding VLANIF 
interfaces, and configure IP addresses and interface address pools.

WLANs allow STAs to access in flexible modes at different locations. STAs may connect 
to the same WLAN in a location (such as the entrance of an office or a stadium), and 
roam to a wireless network covered by other APs. 
If each SSID has only one service VLAN to deliver wireless access to STAs, IP address 
resources may become insufficient in areas with a large number of STAs, and IP 
addresses in other areas are wasted. You can configure VLANs in a VLAN pool as 
service VLAN of STAs so that one SSID can use multiple service VLANs to provide 
wireless access services. 
New STAs are dynamically assigned to VLANs in the VLAN pool, which reduces the 
number of STAs in each VLAN and also the size of the broadcast domain. Additionally, 
IP addresses are evenly allocated, preventing IP address waste. 

Configure an IP address for the DNS server as needed using either of 
the following methods:

In the interface address pool scenario, run the 

dhcp server dns-list 

ip-address &<1-8>

command in the VLANIF interface view.

In the global address pool scenario, run the 

dns-list ip-address &<1-

8>

command in the IP address pool view.

Summary of Contents for S Series











































































Reviews:

No comments