44
Remove the rear access panel.
9
Do not let any screws fall into the rack when
removing them from the rack.
CAUTION
Remove the upper front cover.
10
To elevate the rear plate of the rack, remove
the two M6 hexagon socket screws.
11
Adjust the height of the rear plate as
required.
12
Use two hexagonal socket screws to
secure the rear plate.
13
Use the M6 hex socket wrench
to remove the screws.
Use the M6 hex socket
wrench to tighten the screws.
Elevate the rear plate of the rack and
stop when you hear a click.
NOTE
Appendix A Elevating the Rack
Use the M6 hex socket
wrench to remove the
screws.
Hold the middle part of
the upper front panel
and lift it up.