38
Install the crimping cover.
4
When mounting the rear
access panel onto the rack,
watch your hands.
DANGER
Install the rear cable cover.
6
Insert the TE30 cables
into the rack and pull
them out from the middle
part of the upper front
panel.
5
Insert the dowel into its hole.
Install the rear access panel.
1.
Ensure that all required cables are
installed.
2.
Insert the two dowels on the rear
access panel into the dowel holes
on the rack, and push the panel
up until it is secure.
The following figure shows the
appearance of the rear access
panel.
7
12 Installing the TE30/VPC600
Insert the crimping cover into the
bottle gourd
–shaped mounting pegs.
Tighten the captive screws.
The yellow cable
is indicative.
M
iddl
e
part
of
t
he
uppe
r
fr
ont
pane
l