2 Configuring the IPMI Settings
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
1
2
Con
figuring the IPMI Setting
s
With the Nuvoton WPCM450 BMC Controller and the IPMIView
firmware built in,
the
motherboards allow the user to access, monitor, manage and interface with multiple systems
in various remote locations.
This section provides detailed information on how to con
figure
the IPMI settings.
2.1 Con
figuring BIOS
Before con
figuring IPMI, follow the instructions below to configure the system BIOS settings.
Enabling COM Port for SOL (IPMI)
Step 1
Press the
Del
key at bootup to enter the
BIOS Setup Utility
.
Step 2
Select
Advanced
and press
Enter
to enter the
Advanced
menu.
Step 3
From the
Advanced
menu, select
Remote Access
and press
Enter
.
Step 4
Make sure that the COM port for SOL (COM2 or COM3) is enabled (marked with "*"). If not,
Select the port for SOL and press
Enabled
, See Figure 2-1. (For IPMI to work properly,
BIOS will set the console redirection on this port by default.).
----End
User Guide
Issue 04 (2014-09-15)
RH2488 V2 BMC
