Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
2 Establishment of the Configuration Environment
Issue 05 (2010-01-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-5
Data Preparation
To configure the router through Telnet, you need the following data.
No.
Data
1
IP address of the PC
2
IP address of the Ethernet interface on the router
3
User information accessed through Telnet (including user name, password and
authentication mode)
Configuration Procedures
No.
Procedure
1
Establishing the Physical Connection
2
Configuring Login User Parameters
3
Logging In from the Telnet Client
2.3.2 Establishing the Physical Connection
Connect the router and the PC directly or connect the router and the PC respectively to the
network through the network cable.
2.3.3 Configuring Login User Parameters
Do as follows on the router:
Step 1
Configure the authentication mode of login users.
Step 2
Configure the authority limitation of login user.
For details, refer to the
Quidway NetEngine20/20E Series Routers User Management
.
----End
2.3.4 Logging In from the Telnet Client
Do as follows on the PC:
Step 1
Run the Telnet client program on the PC, and input the IP address of the interface on the
destination router that provides the Telnet service.
Step 2
Enter the user name and password in the login window. After authentication, a command line
prompt such as
Quidway
appears. Now enter the configuration environment in the user view.
----End
