Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
9 Telnet and SSH
Issue 05 (2010-01-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-7
9.2.2 Establishing a Telnet Connection
Do as follows on the logon router:
Step 1
Connect the PC with the router through Telnet and the terminal. For details, see Chapter 2,
"Configuration environment setup."
Step 2
Run:
telnet
[
vpn-instance
vpn-instance-name
]
[
-a
source-ip-address
]
host-name
[
port-number
]
You can now log on to the router through Telnet and manage other routers.
Step 3
Run:
telnet
ipv6
[
-a
source-ip-address
]
host-name
[
-i
interface-type interface-number
]
[
port-number
]
You can now log on to the router through Telnet and manage other routers.
Perform Step 2 to configure the network based on IPv4, and perform Step 3 to configure the
network based on IPv6.
----End
9.2.3 Scheduled Telnet Disconnection
Do as follows on the login router:
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
user-interface
[
ui-type
]
first-ui-number
[
last-ui-number
]
The user interface view is displayed.
Step 3
Run:
idle-timeout
minutes
[
seconds
]
The scheduled Telnet disconnection is enabled.
----End
9.2.4 Checking the Configuration
Run the following commands to check the previous configuration.
Action
Command
Check the connection status of the current
user-interface.
display users
Check the connection status of all user-interfaces.
display users all
