Huawei Quidway NetEngine 20 series Page 132 Configuration Manual Download

Page: 132 / 237

8 FTP, TFTP and XModem

Quidway NetEngine20/20E

Configuration Guide - Basic Configurations

8-10

Huawei Proprietary and Confidential

Issue 05 (2010-01-30)

The router is connected to the FTP server, and the FTP client view is displayed.

Step 2

Perform the following as required.

To upload the local files to the FTP server, run:

put

ocal-filename

[

remote-filename

]

To downloadthe local files from the FTP server, run:

get

remote-filename

[

local-filename

]

----End

8.4.6 Managing Directories

Do as follows on the router that serves as the client:

Step 1

Run:

ftp

[

host

[

port-number

] ] [

vpn-instance

vpn-instace-name

]

The router is connected to the FTP server.

Step 2

Run one or more commands in the following to manage directories.

Run:

pathname

The working path of the remote FTP server is specified.

Run:

cdup

The working path of the FTP server is switched to the upper-level directory.

Run:

pwd

The specified directory of the FTP server is displayed.

Run:

lcd

The specified directory of the FTP client is displayed.

Run:

mkdir

remote-directory

A directory is created on the FTP server.

Run:

rmdir

remote-directory

A directory is deleted on the FTP server.

----End

Summary of Contents for Quidway NetEngine 20 series














































































































































































































































Search results

Summary of Contents for Quidway NetEngine 20 series

Reviews:

Related manuals for Quidway NetEngine 20 series

Brands by name

Popular brands

Huawei Quidway NetEngine 20 series, Configuration Manual

Search results

Summary of Contents for Quidway NetEngine 20 series

Reviews:

Related manuals for Quidway NetEngine 20 series

Brands by name

Popular brands