background image

No.

Item

Description

3

USB

Connects to USB storage devices.

4

Power

Connects to a power adapter.

5

On/Off

Powers the ONT on or off.

6

WLAN

Used to enable or disable the WLAN function.
● When the WLAN is off, press the WLAN button (>

3s) and release the button to open the WLAN.

● When the WLAN is on, press the WLAN button (>

3s) and release the button to close the WLAN.

7

WPS

When the WLAN is on, press the WPS button (> 3s) and

release the button to start Wi-Fi protected setup (WPS)

negotiation.

8

Reset

Press the button for a short time to reset the device, or

press the button for a long time (longer than 10s) to

restore the device to the default settings and reset the

device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs may

fail to access the Internet. If an ONT cannot access the

Internet after a reset, contact your Internet service provider.

9

Optical port

The optical port is equipped with a rubber plug and

connected to a fiber for upstream transmission.
The type of the optical connector connected to the

optical port can be SC/APC.

Huawei OptiXstar HN8145X6v

Quick Start for QR code

2 Connecting Cables

Issue 01 (2022-05-23)

Copyright © Huawei Technologies Co., Ltd.

5

Summary of Contents for OptiXstar HN8145X6v

















Reviews: