27
3 Installing/Routing External Fibers
Prepare for Fiber Routing
– Remove the Front Door of the Cabinet
a
1
1
Use a screwdriver to loosen the ground screw at
the bottom of the cabinet door and disconnect the
cabinet door from the ground cable. The removed
screw must be stored properly.
2
2
Place the cabinet door on the ground. It is
recommended that you use flexible materials such as
foam to protect the cabinet door from scratches.
3
3
Hold and pull down the lock rod on the upper part
of the cabinet door to separate the rotating shaft
from the cabinet (ensure that the cabinet door
does not fall down), and then lift and remove the
cabinet door.
If the front door of the cabinet has been removed,
skip this step.
NOTE