Huawei MU736 HSPA+ M.2 Hardware Manual Download Page 53

Page: 53 / 81

HUAWEI MU736 HSPA+ M.2 Module
Hardware Guide

Electrical and Reliability Features

Issue 05 (2014-01-14)

Huawei Proprietary and Confidential

5.3 Operating and Storage Temperatures and Humidity

Table 5-2 lists the operating and storage temperatures and humidity for the MU736
module.

Table 5-2

operating and storage temperatures and humidity for the MU736 module

Specification

Min.

Max.

Unit

Normal working temperatures

[1]

–10

+55

°C

Extended temperatures

[2]

–20

+70

°C

Ambient temperature for storage

–40

+85

°C

Moisture

[1]: When the MU736 module works at this temperature, all its RF indexes comply with the
3GPP TS 45.005 specifications.

[2]: When the MU736 module works at this temperature,

NOT

all its RF indexes comply with the

3GPP TS 45.005 specifications.

5.4 Electrical Features of Application Interfaces

Table 5-3

Electrical features of Digital Pins

Parameter

Description

Min.

Max.

Unit

BodySAR_N

1.26

3.6

–0.2

0.3

RESET

1.26

2.1

–0.2

0.3

Power_On_Off

1.26

3.6

–0.2

0.3

W_DISABLE

1.26

3.6

–0.2

0.3

GPS_DISABLE

1.26

3.6

–0.2

0.3

SIM_DET

1.26

2.1

–0.2

0.3

Summary of Contents for MU736 HSPA+ M.2


















































































Search results

Summary of Contents for MU736 HSPA+ M.2

Reviews:

Related manuals for MU736 HSPA+ M.2

Brands by name

Popular brands

Huawei MU736 HSPA+ M.2, Hardware Manual

Search results

Summary of Contents for MU736 HSPA+ M.2

Reviews:

Related manuals for MU736 HSPA+ M.2

Brands by name

Popular brands