Huawei MU736 HSPA+ M.2 Hardware Manual Download Page 16

Page: 16 / 81

HUAWEI MU736 HSPA+ M.2 Module
Hardware Guide

Description of the Application Interfaces

Issue 05 (2014-01-14)

Huawei Proprietary and Confidential

Pin

No.

Pin Name

I/O Description

DC Characteristics (V)

Normal

Min.

Typ.

Max.

Not Connected

Ground

I2C_SCL

I2C clock

This function is under development.

–0.3

1.8

2.1

Not Connected

I2C_SDA

I2C data

This function is under development.

–0.3

1.8

2.1

Not Connected

I2C_IRQ

Interrupt signal to wake up the module.

This function is under development.

–0.3

1.8

2.1

Ground

SYSCLK

System clock output for external GNSS
module. MU736 does not support
GLONASS.

This function is under development.

–0.3

1.8

2.1

Not Connected

TX_BLANKING

Tx blanking signal for external GNSS
module. MU736 doesn

’t support

GLONASS.

This function is under development.

–0.3

1.8

2.1

Not Connected

Ground

Not Connected

Ground

Not Connected

ANTCTL0

Tunable antenna control signal, bit 0.

It is a push-pull type GPIO.

–0.3

1.8

2.1

Summary of Contents for MU736 HSPA+ M.2


















































































Search results

Summary of Contents for MU736 HSPA+ M.2

Reviews:

Related manuals for MU736 HSPA+ M.2

Brands by name

Popular brands

Huawei MU736 HSPA+ M.2, Hardware Manual

Search results

Summary of Contents for MU736 HSPA+ M.2

Reviews:

Related manuals for MU736 HSPA+ M.2

Brands by name

Popular brands