5
You need to perform the preceding operations on a computer once only. The next time
when you power on your computer, you can surf the Internet without any configuration.
3.2
Accessing the Network Through the PPP
Dial-up Software on Your Computer
If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
operations on your computer upon each startup. To configure the MT886 and your
computer for the network access, do as follows:
Step 1
Set the working mode of the MT886 to
Bridge
.
For details, refer to the procedure for enabling the embedded dial-up function
described in Step 2 in section 3.1 "Accessing the Network Through the
Embedded PPP Dial-up Software on the MT886." Note that
Bridge
is
selected from the
Mode
drop-down combo box.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating
systems. To create a dial-up connection, do as follows (taking the Windows
XP operating system as an example):
1.
Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
2.
Click
Create a new connection
in
Network Tasks
to display the
New
Connection Wizard
window, and then click
Next
.
3.
Select
Connect to the Internet
, and then click
Next
.
4.
Select
Set up my connection manually
, and then click
Next
.
5.
Select
Connect using a broadband connection that requires a user
name and password
, and then click
Next
.
6.
Enter the name (as desired) of the dial-up connection in
ISP Name
, and
then click
Next
.
7.
Select
Anyone's use
or
My use only
, and then click
Next
.
8.
Enter the user name and password provided by the network operator and
used for the dial-up connection, and then click
Next
.
9.
Select
Add a shortcut to this connection to my desktop
, and then click
Finish
.
An icon for the dial-up connection is displayed on the desktop of your
computer.
You need to perform the preceding operations only once for creating a network
connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click
Connect
in the
displayed dialog box.
