manualshive.com logo in svg

Huawei MG323, At Command Interface Specification

Share
Download
Huawei MG323 At Command Interface Specification Download Page 25

 

HUAWEI MG323 GSM M2M Module 
AT Command Interface Specification 

Overall Description

 

Issue 02 (2010-11-23) 

Huawei Proprietary and Confidential 

Copyright © Huawei Technologies Co., Ltd.

8

 

Chapter 

Describes 

Chapter 7 Commands for Call Control 

The AT commands used to control 
the calls on the module.   

Chapter 8 Commands for Network Services 

The AT commands related to the 
network services of the module.   

Chapter 9 Commands for Data Services 

The AT commands related to the 
data services of the module.   

Chapter 10 Commands for Internet Services 

The AT commands related to the 
internet services of the module.   

Chapter 11 Commands for Short Messages 

The AT commands related to the 
short messages of the module.   

Chapter 12 Commands for the SIM Card 

The AT commands related to the SIM 
card of the module.   

Chapter 13 Commands for the Phone Book 

The AT commands related to the 
phone book of the module.   

Chapter 14 Commands for Hardware Control 

The AT commands used to control 
the hardware of the module.   

Chapter 15 Commands for Audio Control 

The AT commands used to control 
the audio of the module. 

Chapter 16 Other Commands 

Other auxiliary commands 

Chapter 17 Appendix  

Summary of Contents for MG323
















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands