Huawei MG323 At Command Interface Specification Download Page 139

Page: 139 / 239

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification

Commands for Data Services

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

122

9.6.3 Examples

Example:

Define the PDP context.

AT+CGDCONT=1,“IP”,“1234”

Activate the PDP context.

AT+CGACT=1,1

Read the PDP address.

AT+CGPADDR=1

+CGPADDR:1,“192.168.50.64”

9.7 AT+CGQMIN - Command for Setting the Acceptable
Minimum Quality of Service Profile

The

AT+CGQMIN

command allows the TE to specify an acceptable minimum quality

of service (QoS). This profile is verified by the MT and is compared with the
negotiation profile returned by the “PDP context activation” message.

The write command can specify a profile for the context. This profile is identified by
the (local) context identification parameter

<cid>

. If

AT+CGQMIN= <cid>

is sent, the

defined QoS of

<cid>

is deleted.

Summary of Contents for MG323
















































































































































































































































Search results

Summary of Contents for MG323

Reviews:

Brands by name

Popular brands

Huawei MG323, At Command Interface Specification

Search results

Summary of Contents for MG323

Reviews:

Brands by name

Popular brands