manualshive.com logo in svg

Huawei MG323, At Command Interface Specification

Share
Download
Huawei MG323 At Command Interface Specification Download Page 131

 

HUAWEI MG323 GSM M2M Module 
AT Command Interface Specification 

Commands for Data Services

 

Issue 02 (2010-11-23) 

Huawei Proprietary and Confidential 

Copyright © Huawei Technologies Co., Ltd.

114

 

OK 

 

9.3 AT+CGEREP - Command for Reporting GPRS Events 

The 

AT+CGEREP

 command sets the unsolicited reporting of GPRS events. When 

certain events occur on the GPRS MT or the network, this command can enable or 
disable the sending of 

URC+CGEV:

 

XXX

 from the MT to the TE. For the +CGEV 

reporting command, refer to section 9.11 .   

9.3.1 Checking the Supported GPRS Event Reporting Mode 

Test 

command 

AT+CGEREP=? 

Function 

Checks the supported GPRS event reporting mode.   

Response 

z

 

In case of successful execution:   
<CR><LF>+CGEREP: (list of <mode>s),(list of supported 
<bfr>s)<CR><LF> 
<CR><LF>OK<CR><LF> 

z

 

In case of an error during command execution: 
<CR><LF>ERROR<CR><LF> 

z

 

In case of an error related to the MT: <CR><LF>+CME ERROR: 
<err><CR><LF> 

 

Parameter description 

<mode>: numeric parameter.   

z

 

0: buffers the URCs on the MT. If the buffer is full, the oldest URC is discarded 
and URCs are not sent to the TE.   

z

 

1: When the MT-TE link is reserved (for example, in online data mode), URCs 
are discarded. Otherwise, URCs are directly forwarded to the TE.   

z

 

2: When the MT-TE link is reserved (for example, in online data mode), URCs 
are buffered. After the MT-TE link is available, all URCs are sent to the TE. 
Otherwise, URCs are directly forwarded to the TE. If the buffer is full, the oldest 
URC is discarded.   

<bfr>: numeric parameter.   

z

 

0: When the entered value of the 

<mode>

 parameter is 

1

 or 

2

, the URC buffer 

defined by this command is cleared.   

z

 

1: When the entered value of the 

<mode>

 parameter is 

1

 or 

2

, the URC buffer 

defined by this command is fully sent to the TE (OK is returned before sending) 
and the buffer is cleared.   

Summary of Contents for MG323
















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands