MediaPad 7 Lite Maintenance Manual
INTERNAL
2012-10-08
Huawei Confidential
Page 32 of 82
9. Disassemble the FPCs of the power and volume
keys. Do not forcibly pull out the ears from the ZIF
connector to avoid damaging the ZIF card fastener. The
part that is pulled out cannot exceed the position lines
at both ends of the
PCBA
.
Note: The FPCs of the power and volume
keys are pasted on the PCBA using the
adhesive. Therefore, you must use a
wooden tweezers to carefully
disassemble the FPCs.
10.
Disassemble the 10 self-tapping screws used for fastening the speaker and audio box,
battery connector, headset jack, and PCBA.
Speaker and
audio box
Disassemble the screw of
the battery connector tablet.
10. Disassemble the 10 self-
tapping screws used for fastening
PCBA
, headset, speaker, and
battery.
Headset jack
11.
Remove the headset jack, front network camera, and rear network camera from the
PCBA.
