background image

Summary of Contents for VICTOR 15E

Page 1: ...r the omission of the power switch FOR RECORD CHANGER SERVICE DATA REFER TO RP 190 SERIES SERVICE DATA Manual Turntable The manual turntable will play one 331f3 or 78 r p m record up to twelve inches in diameter The speed is con trolled by a knob on the motorbocrd The correct stylus is selected by a lever knob on the end of the picklW arm VOLUME CONTROL STOP This instrument is provided with a volu...

Page 2: ...d wear b Pickup arm pivots should be adjusted to provide a minimum of side play yet al lowing free vertical movement Binding may cause stylus to jump groove c Inner surface 01 turntable rim must be dean and smooth Idler wheel and drive pulleys must have no rough spots and be free of oil and grease Roughness may cause rumble oil may cause wow d Lubricate idler wheel and drive pulleys with a good qu...

Page 3: ... inch only The board should float freely on its mounts there must be no restriction 0 movement Reconnect the black power plug and insert phone plug in the chassis socket Place the instrument in the upright position and untie pickup arms To adapt STYLUS CONTROL LEVER With lever in 33 position loosen left holding screw just enough to turn lug to the position shown below and tighten screw This will p...

Page 4: ...ickup arm mounting Bracket Pilot lamp bracket Cop e Pilot lamp cap Foot Rubber foot 4 req d Grommet Rubber grommet for mounting 45 RPM changer 3 req d Grommet Rubber grommet for motor board 4 req d Knob Selector switch knob tan Knob Tone control or volume control knob brown Lamp e Pilot Icmp c Mczdo 51 Link Motor speed change link bent end section only Link Motor speed change link slotted section ...

Reviews: