Huawei ME909s Series Hardware Manual Download Page 42 | Manualshive

Page: 42 / 76

background image

HUAWEI ME909s Series LTE Mini PCIe Module
Hardware Guide

RF Specifications

Issue 02 (2016-09-07)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

42

B40 TX/RX

WIFI TX/RX

B38 TX/RX

B41 TX/RX

2300MHz

2400MHz

2401MHz

2495MHz

2570MHz

2620MHz

2500MHz

2496MHz

2690MHz

B7 uplink

B7 downlink

The two systems interfere with each other because of nonl inear characteristic of LTE
Band 38/40/41 and Wi-Fi transmitter. The main impacts are as follows:

1. LTE Band transmitter spurious in Wi-Fi Band impacts on the sensitivity of Wi-Fi

receiver.

2. LTE Band output power can block Wi-Fi receiver.

3. Wi-Fi transmitter spurious in LTE Band impacts on the sensitivity of LTE Bands.

4. Wi-Fi output power can block LTE Band receiver.

According to the theoretical analysis, in order to achieve the co-existence between
Wi-Fi and LTE, the rejection between Wi-Fi and LTE Band 41 or Band 40 needs to be
over 60 dB. (The analysis is based on the Wi-Fi chip Broadcom BCM432XX, the
co-existence design depends o

n the customer’s Wi-Fi chipset specification.)

In fact, the current devices cannot meet this requirement, so we need to increase the isolation
between antennas and disable some channels.

4.6.2

Suggestions about the Interference

These risks have been taken into consideration in the design of the ME909s Mini PCIe
module. The system design also should be paid attention:

1. It is recommended that the system should be added Wi-Fi SAW filter to

guarantee good attenuation in the LTE transmit Band (including Band 38, Band
40, Band 41), otherwise, LTE Band output power will block Wi-Fi receiver.

2. The good isolation between LTE antenna and Wi-Fi antenna is more than 25 dB.

3. Two ways above can help to make the isolation to be 60 dB. If they are still not

enough, some channels may need to be disabled.

«
...
40
41
42
43
44
...
»

Summary of Contents for ME909s Series













































































Reviews:

No comments

Related manuals for ME909s Series

Brand: Hankscraft Runxin Pages: 53

Brand: Febco Pages: 12

Brand: Game ready Pages: 21

Brand: VAMP Pages: 304

Brand: Omegalink Pages: 2

Brand: D+H Pages: 32

Real Living iM1

Brand: Yale Pages: 2

Brand: McIntosh Pages: 68

Brand: FMS Pages: 9

Brand: SIEB & MEYER Pages: 119

TITAN-TRACKSIDE-6

Brand: RC System Pages: 4

Dual Motor Focus Controller

Brand: Pegasus Astro Pages: 16

Brand: Data Aire Pages: 137

Brand: Samson Pages: 44

Brand: FUTABA Pages: 16

AMP 3K/40 CE 2161600-1

Brand: TE Connectivity Pages: 29

Brand: Vasco Pages: 4

smartsystem 19035

Brand: Gardena Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands