6
Illuminator appearance and ports
Cable connection between cameras and illuminators
Cable Type
Color
Three-core cable
(power cable)
Brown: 220 V (live); blue: 220 V (neutral);
yellow-green: GND (earth)
Level signal cable
Red: positive level output terminal (T1
–T4)
Black: GND
Yellow: not involved
Boolean value signal cable
Red: positive trigger (F1+, F2+, F3+, and F4+)
Black: negative trigger (F1-, F2-, F3-, and F4-)
Strobe light
Flash light
Strobe light
Flash light
Note:
• The T ports of Huawei standard checkpoint cameras can only identify levels ranging from 0 V to 5 V.
• Actual cables may vary. Please refer to the device label.
• If the signal control cable of the illuminator is not clearly identified as a level output or a Boolean value cable,
check the illuminator instructions or consult the illuminator supplier to confirm the signal control cable type.
• Waterproof and insulate the pigtail cables to prevent water from entering the device. For details, see the
Quick
Start Guide
delivered with the camera.
Adjust the Lens
Install Illuminators
Adjust the Illuminator
Light Spot
Determine Scenario
Requirements
Install and Adjust
Radar Detectors
Install Illuminators: Strobe Lights and Flash Lights
