12
1. Power on the camera.
2. Use a network cable to connect the camera to the commissioning laptop (or a video security tester).
3. Change the laptop IP address to be in the same network segment as the camera IP address.
The default values of
ETH0
and
ETH1
are
192.168.0.120
and
192.168.1.120
respectively for the camera.
If the camera is not directly connected to the network or you have logged in to the camera before, you
can use the SimsLite (or iClient SDC) to search for the camera IP address.
4. Open Internet Explorer as an administrator and enter the default camera IP address in the address box.
6. Configure text overlay on the image.
• Choose
Settings
>
Video/Audio/Image
>
OSD
.
•
Click
Add OSD
or the edit icon in the
Operation
column and add the camera
installation location to the
Content
column, as shown in the following figure.
5. Change the IP address of the camera as planned.
• Choose
Settings
>
Network
>
TCP/IP
.
• You need to configure IP addresses for the two network ports respectively.
Search for and Log In to a Camera
Search for and Log In
to a Camera
Adjust the
Camera Focus
Configure
Checkpoint Services
Adjust Camera Angles
Set Illuminator
Parameters
Commission the
Radar Detector
